Penetrating Damp Treatment

Guide · Homeowners · 3 min read · Updated 17 November 2026

Penetrating Damp in Cavity Walls: Causes and Repairs

Short answer

Cavity walls are designed to stop rain crossing from the outer to the inner leaf, but damp can still get through when the cavity is bridged. Common causes are mortar droppings on wall ties, rubble at the base, missing or failed cavity trays, and insulation unsuited to the wall's exposure. Investigation uses borescopes and removing bricks, and repairs range from cavity clearing to correcting trays.

Penetrating Damp in Cavity Walls: Causes and Repairs

How a cavity wall keeps water out

Most British houses built from the 1930s onwards have cavity walls: an outer leaf of brick or block, a gap, and an inner leaf. Rain that soaks through the outer leaf runs down its inside face and drains out at the bottom through weep holes or the base of the cavity. Metal wall ties link the two leaves for strength, and they are designed with a drip in the middle so water cannot run across them.

Above windows, doors and where roofs meet walls, cavity trays catch water in the cavity and direct it outwards. The whole system relies on the gap staying clear. When something bridges it, water can reach the inner leaf and show as damp inside.

Common causes of cavity wall damp

Bridging during construction is one of the most frequent problems. Mortar dropped down the cavity can settle on wall ties or build up at the base above the damp course, giving water a path across. Missing, damaged or badly lapped cavity trays above openings and at lean-to roof junctions are another regular cause, especially where extensions have been added.

Damp patches from these defects often appear in specific places: a small spot at the height of a row of wall ties, or a patch either side of a window head.

Older cavity walls may also suffer from corroded wall ties, which can crack the outer leaf along the mortar joints and let more water in. Horizontal cracks at regular intervals are a warning sign that should be checked by a surveyor.

  • Mortar droppings resting on wall ties
  • Rubble or debris at the base of the cavity
  • Missing or failed cavity trays above openings
  • Poor detailing where an extension roof meets the wall
  • Cavity insulation in a very exposed location
  • Blocked or missing weep holes

Cavity wall insulation and damp

Filling cavities with insulation is a common energy-saving measure, and in most homes it causes no trouble. In some cases, though, it can contribute to damp. Walls facing driving rain, particularly in exposed coastal and upland areas, may allow water to cross the insulation where the outer leaf is in poor condition. Approved Document C includes guidance on wind-driven rain exposure when deciding whether a wall is suitable for cavity fill.

If damp appeared after insulation was installed, check the paperwork. Insulation fitted by a registered installer is often covered by a guarantee from the Cavity Insulation Guarantee Agency, and that is the first route to investigate before paying for any work yourself.

How specialists investigate

A surveyor starts by mapping the damp inside and comparing it with the outside. They check the condition of the outer leaf, pointing and render, and look at weep holes and tray positions. To see inside the cavity, they may drill a small hole and use a borescope camera, or remove a brick in a discreet spot. Thermal imaging can reveal cold patches where insulation has slumped or got wet.

The aim is to confirm what is bridging the cavity before any repair starts, because different causes need different fixes.

FindingTypical repair
Debris at base of cavityRemove bricks at low level and clear the cavity
Mortar on wall tiesRemove bricks locally and clear ties
Failed or missing cavity trayCut out brickwork and install a new tray with weep holes
Wet or unsuitable insulationExtract insulation and reassess the wall
Poor outer leaf conditionRepoint or repair render to reduce water entry

Repairs and what to expect

Clearing debris involves removing several bricks at low level, raking out the rubble and rebuilding with matching bricks. Fixing a cavity tray above a window or at a roof junction means carefully cutting out the brickwork above, fitting a new tray with stop ends and weep vents, and rebuilding. Where insulation is the problem, extraction is a specialist job using vacuum equipment through holes drilled in the outer leaf.

Repointing at £45 to £90 per m² or render repairs from £250 may also be needed to reduce how much water reaches the cavity in the first place. Once repairs are done, give the inner wall time to dry before redecorating.

Preventing cavity damp

Keep the outer leaf in good condition, with sound pointing and render. Make sure weep holes are not blocked by paint, soil or paving. When building an extension or conservatory against a cavity wall, ask the builder how they will detail the cavity tray at the junction, and check it before it is covered. If you are considering cavity insulation on an exposed wall, get advice on whether the wall is suitable before installation.

Is it penetrating damp or something else?

Damp on the inner face of a cavity wall is not always penetrating damp. Cold bridging around window reveals and lintels can cause condensation and mould that looks similar, especially where insulation is missing or has slumped. A plumbing leak inside a wall can also produce a damp patch. A specialist will check surface temperatures and humidity, and look at how the damp responds to rain, before deciding which problem is present.

Questions people also ask

Can cavity wall insulation cause damp?

In most homes it does not. Problems mainly occur on walls exposed to heavy wind-driven rain, where the outer leaf is in poor condition or where installation was faulty. If damp appeared after insulation was fitted, check for a guarantee from the Cavity Insulation Guarantee Agency and contact the installer before paying for repairs.

What are weep holes for?

Weep holes are small gaps or vents left in the outer leaf, usually at the base of the wall and above cavity trays. They let water that has collected in the cavity drain out. If they are blocked by paint, mortar or soil, water can build up and find its way to the inner leaf.

How do you check a cavity for debris?

A specialist drills a small hole in a mortar joint and inserts a borescope camera, or removes a brick in a discreet position. This shows whether mortar droppings or rubble are sitting at the base of the cavity or on wall ties. Thermal imaging can also suggest where to look.

Written and checked by the Penetrating Damp Treatment team. Read our editorial policy.

Get a free penetrating damp treatment quote

Tell us what you need and we'll come back with a clear price.

Request a quote