Penetrating Damp Treatment glossary
The terms you'll come across, explained in plain English.
- Cavity drain membrane
- A studded plastic sheet fixed to below-ground walls that lets water run behind it to a drainage channel and sump, keeping the room dry.
- Cavity tray
- A barrier in a cavity wall above openings or roof junctions that catches water in the cavity and directs it out through weep holes.
- Chimney cap
- A cover fitted on top of an unused chimney pot or flue to stop rain falling down it while still allowing ventilation.
- Drip groove
- A groove or projection under a window sill, coping or render edge that makes water drip clear of the wall instead of running back onto it.
- Flashing
- A strip of lead or other material sealing the junction between a roof and a wall or chimney. Lifted or split flashing is a common cause of damp.
- Hopper head
- A box-shaped fitting at the top of a downpipe that collects water from gutters or waste pipes. Blocked hoppers overflow onto the wall below.
- Lime mortar
- A softer, breathable mortar based on lime. It suits older solid-walled buildings because it lets moisture escape through the joints rather than the brick face.
- Penetrating damp
- Water entering a building from outside through defects in roofs, walls, windows, gutters or below-ground structures. It can appear at any height and often worsens after rain.
- Pointing
- The mortar finish in the outer face of joints between bricks or stones. Eroded or cracked pointing lets rain soak into the wall.
- Render
- A coating of sand and lime or cement applied to external walls. Cracked or hollow render can let water in and then trap it behind the surface.
- Spalling
- The flaking or breaking away of a brick or stone face, often caused by trapped moisture freezing and expanding in winter.
- Tanking
- Applying a waterproof coating or render to below-ground walls to hold back water. It must resist water pressure and be correctly detailed to work.
- Wall tie
- A metal tie linking the two leaves of a cavity wall. Mortar resting on ties can create a bridge for water to cross the cavity.
- Weep hole
- A small gap or vent in the outer leaf of a cavity wall that lets water collected in the cavity drain out.
- Wind-driven rain
- Rain blown sideways against walls by strong winds. Exposure to it varies across the UK and affects how much water walls absorb.
Get a free penetrating damp treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote