Penetrating Damp Treatment
Repointing and Masonry Repairs
Eroded or cracked mortar joints raked out and repointed, with spalled bricks or stones replaced so walls shed water properly again.

What's involved
When mortar erodes or cracks, rain is drawn deep into the wall. Repointing starts by raking out joints to a depth of about 15 to 25 millimetres, or twice the joint height, using hand tools or a careful grinder. Joints are dampened and filled with mortar matched to the wall. For older solid walls, that means a lime mortar softer than the bricks or stone, so moisture can escape through the joints rather than the masonry faces. Modern cement mortar on soft bricks causes faces to spall. Damaged bricks are cut out and replaced with matching reclaimed or new units. A typical gable takes two to four days with scaffolding. Repointing is best done between spring and autumn, avoiding frost.
How we handle it
Describe the damp
Use the quote form to say where damp appears, which floor it is on, whether it worsens after rain and if any repairs have already been tried.
Trace the water route
A specialist inspects outside and inside, checks gutters, pointing, render, roofs and cavities, and identifies where water is getting in.
Get a clear price
You receive one price for the external repair and any internal making good, including scaffolding or access equipment where needed.
Repair the cause
The right trade fixes the defect, from gutter work and repointing to flashing repairs, render replacement or basement waterproofing.
Dry and make good
Once the wall dries, damaged plaster and decoration are repaired. You get written details of the work for your records.
Price guide
Penetrating damp treatment is priced on the repair needed, the access required and the amount of internal making good. Simple gutter fixes cost little, while repointing, re-rendering and basement waterproofing are larger projects. Scaffolding can be a significant part of the cost on upper floors. Typical 2026 costs are set out below.
- Render patch repair: from £250. Cutting out and patching cracked or hollow render on a small area of wall.
- Repointing a wall: £45–£90 per m². Raking out and repointing with lime or cement mortar, excluding scaffolding costs.
- Gutter and downpipe repair: £120–£450. Clearing, resealing joints and refixing brackets on a typical house, depending on access and length.
Questions about repointing and masonry repairs
Do water-repellent masonry creams work?
Water-repellent masonry creams can reduce rain absorption on sound brick walls exposed to driving rain. They work best after repointing and repairs, not as a substitute. On older solid walls, choose a breathable product and take advice first, as some treatments can trap moisture or salts in the wall.
Other services
Gutter, Downpipe and Drainage Repairs
Blocked, leaking or misaligned gutters and downpipes repaired or replaced so rainwater is carried away from walls instead of soaking them.
Render Repairs and Replacement
Cracked, hollow or blown render repaired or replaced, with breathable lime render or modern systems chosen to suit the wall behind.
Roof, Chimney and Flashing Repairs
Slipped slates, cracked tiles, failed lead flashings and leaking chimney stacks repaired to stop water running into walls and ceilings.
Cavity Wall Damp Investigation
Damp caused by debris in cavities, failed cavity trays or unsuitable cavity wall insulation investigated with boroscopes and removed bricks.
Basement and Below-Ground Waterproofing
Cellars and basements protected against water from the ground using cavity drain membranes, tanking or drainage designed to BS 8102.
Repointing and Masonry Repairs near you
Get a free penetrating damp treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote