Penetrating Damp Treatment
Roof, Chimney and Flashing Repairs
Slipped slates, cracked tiles, failed lead flashings and leaking chimney stacks repaired to stop water running into walls and ceilings.

What's involved
Damp on chimney breasts, upper walls and ceiling corners often starts at roof level. Lead flashings around chimneys and abutments lift or split, mortar fillets crack, slates slip and chimney stacks soak up rain through worn pointing and unprotected tops. The roofer inspects with a drone, ladder or scaffold, re-dresses or replaces lead flashings, refixes slates and tiles, repoints stacks and fits caps or cowls to disused flues while keeping them ventilated. Valleys and parapet gutters are checked for blockages and splits. Flat roof leaks over bays and extensions are traced and repaired or re-covered. Most chimney and flashing repairs take one to two days with access equipment. Note which rooms show damp and after which kind of weather.
How we handle it
Describe the damp
Use the quote form to say where damp appears, which floor it is on, whether it worsens after rain and if any repairs have already been tried.
Trace the water route
A specialist inspects outside and inside, checks gutters, pointing, render, roofs and cavities, and identifies where water is getting in.
Get a clear price
You receive one price for the external repair and any internal making good, including scaffolding or access equipment where needed.
Repair the cause
The right trade fixes the defect, from gutter work and repointing to flashing repairs, render replacement or basement waterproofing.
Dry and make good
Once the wall dries, damaged plaster and decoration are repaired. You get written details of the work for your records.
Price guide
Penetrating damp treatment is priced on the repair needed, the access required and the amount of internal making good. Simple gutter fixes cost little, while repointing, re-rendering and basement waterproofing are larger projects. Scaffolding can be a significant part of the cost on upper floors. Typical 2026 costs are set out below.
- Render patch repair: from £250. Cutting out and patching cracked or hollow render on a small area of wall.
- Repointing a wall: £45–£90 per m². Raking out and repointing with lime or cement mortar, excluding scaffolding costs.
- Gutter and downpipe repair: £120–£450. Clearing, resealing joints and refixing brackets on a typical house, depending on access and length.
Questions about roof, chimney and flashing repairs
Why is there damp on my chimney breast?
Damp on a chimney breast is often caused by rain getting in through the stack, failed lead flashings or an uncapped flue. It can also come from hygroscopic salts left by years of burning fuel, which attract moisture. A capped, ventilated flue and stack repairs usually solve it.
Other services
Gutter, Downpipe and Drainage Repairs
Blocked, leaking or misaligned gutters and downpipes repaired or replaced so rainwater is carried away from walls instead of soaking them.
Repointing and Masonry Repairs
Eroded or cracked mortar joints raked out and repointed, with spalled bricks or stones replaced so walls shed water properly again.
Render Repairs and Replacement
Cracked, hollow or blown render repaired or replaced, with breathable lime render or modern systems chosen to suit the wall behind.
Cavity Wall Damp Investigation
Damp caused by debris in cavities, failed cavity trays or unsuitable cavity wall insulation investigated with boroscopes and removed bricks.
Basement and Below-Ground Waterproofing
Cellars and basements protected against water from the ground using cavity drain membranes, tanking or drainage designed to BS 8102.
Roof, Chimney and Flashing Repairs near you
Get a free penetrating damp treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote