Penetrating Damp Treatment
Basement and Below-Ground Waterproofing
Cellars and basements protected against water from the ground using cavity drain membranes, tanking or drainage designed to BS 8102.

What's involved
Below ground, penetrating damp is driven by groundwater and soil moisture pressing on walls and floors. BS 8102 sets out three types of protection: barrier systems such as cementitious tanking, structurally integral protection such as watertight concrete, and drained protection, where a cavity drain membrane directs water to a channel and sump pump. Many existing cellar conversions use a drained system, because it manages water rather than resisting full pressure. The specialist assesses the water table, wall construction and intended use of the space, from storage to a habitable room, then designs a suitable system. Installation includes preparing surfaces, fitting membranes or tanking, channels and pumps, and often a maintenance plan for the pump. Projects take one to three weeks.
How we handle it
Describe the damp
Use the quote form to say where damp appears, which floor it is on, whether it worsens after rain and if any repairs have already been tried.
Trace the water route
A specialist inspects outside and inside, checks gutters, pointing, render, roofs and cavities, and identifies where water is getting in.
Get a clear price
You receive one price for the external repair and any internal making good, including scaffolding or access equipment where needed.
Repair the cause
The right trade fixes the defect, from gutter work and repointing to flashing repairs, render replacement or basement waterproofing.
Dry and make good
Once the wall dries, damaged plaster and decoration are repaired. You get written details of the work for your records.
Price guide
Penetrating damp treatment is priced on the repair needed, the access required and the amount of internal making good. Simple gutter fixes cost little, while repointing, re-rendering and basement waterproofing are larger projects. Scaffolding can be a significant part of the cost on upper floors. Typical 2026 costs are set out below.
- Repointing a wall: £45–£90 per m². Raking out and repointing with lime or cement mortar, excluding scaffolding costs.
- Gutter and downpipe repair: £120–£450. Clearing, resealing joints and refixing brackets on a typical house, depending on access and length.
- Basement waterproofing: £90–£180 per m². Cavity drain membrane or tanking with drainage and sump, depending on design and use.
Questions about basement and below-ground waterproofing
What is the best way to waterproof a basement?
The best basement waterproofing depends on the water table, wall construction and intended use. BS 8102 describes barrier, integral and drained protection. Many existing basements use a cavity drain membrane with a channel and sump pump, which manages water reliably. A specialist should design the system for your property.
Other services
Gutter, Downpipe and Drainage Repairs
Blocked, leaking or misaligned gutters and downpipes repaired or replaced so rainwater is carried away from walls instead of soaking them.
Repointing and Masonry Repairs
Eroded or cracked mortar joints raked out and repointed, with spalled bricks or stones replaced so walls shed water properly again.
Render Repairs and Replacement
Cracked, hollow or blown render repaired or replaced, with breathable lime render or modern systems chosen to suit the wall behind.
Roof, Chimney and Flashing Repairs
Slipped slates, cracked tiles, failed lead flashings and leaking chimney stacks repaired to stop water running into walls and ceilings.
Cavity Wall Damp Investigation
Damp caused by debris in cavities, failed cavity trays or unsuitable cavity wall insulation investigated with boroscopes and removed bricks.
Basement and Below-Ground Waterproofing near you
Get a free penetrating damp treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote