Penetrating Damp Treatment

Penetrating Damp Treatment

Render Repairs and Replacement

Cracked, hollow or blown render repaired or replaced, with breathable lime render or modern systems chosen to suit the wall behind.

Free Penetrating Damp Treatment quote

No obligation. We only use your details to reply about this job.

Render Repairs and Replacement — Penetrating Damp Treatment

What's involved

Render protects a wall only while it is intact. Hairline cracks let water in, and hard cement render then stops it drying out, so the wall behind gets wetter year after year. The specialist taps render to find hollow areas and checks cracks for water staining. Small areas can be cut out and patched. Where render has failed widely, it is stripped back and replaced. Older solid walls are best re-rendered with lime, which lets moisture escape, while modern blockwork often suits a through-coloured or silicone render system. Bell-cast beads are fitted at the base and around openings to throw water clear. A full elevation usually takes one to two weeks, including scaffold time and curing between coats.

How we handle it

  1. Describe the damp

    Use the quote form to say where damp appears, which floor it is on, whether it worsens after rain and if any repairs have already been tried.

  2. Trace the water route

    A specialist inspects outside and inside, checks gutters, pointing, render, roofs and cavities, and identifies where water is getting in.

  3. Get a clear price

    You receive one price for the external repair and any internal making good, including scaffolding or access equipment where needed.

  4. Repair the cause

    The right trade fixes the defect, from gutter work and repointing to flashing repairs, render replacement or basement waterproofing.

  5. Dry and make good

    Once the wall dries, damaged plaster and decoration are repaired. You get written details of the work for your records.

Price guide

Penetrating damp treatment is priced on the repair needed, the access required and the amount of internal making good. Simple gutter fixes cost little, while repointing, re-rendering and basement waterproofing are larger projects. Scaffolding can be a significant part of the cost on upper floors. Typical 2026 costs are set out below.

  • Full elevation re-render: £50–£95 per m². Stripping and replacing render with lime or modern systems, plus scaffolding.
  • Render patch repair: from £250. Cutting out and patching cracked or hollow render on a small area of wall.
  • Repointing a wall: £45–£90 per m². Raking out and repointing with lime or cement mortar, excluding scaffolding costs.

Questions about render repairs and replacement

How much does penetrating damp treatment cost?

Costs vary widely with the cause. Gutter repairs typically cost £120–£450, repointing £45–£90 per square metre and chimney flashing repairs £350–£1,200. Re-rendering costs £50–£95 per square metre, and basement waterproofing £90–£180 per square metre. Scaffolding and internal making good add to the total.

Can penetrating damp cause mould?

Yes, penetrating damp keeps walls wet and cold, which can encourage mould growth on the surface. Fixing the water source and drying the wall stops the mould returning. Clean existing mould with a suitable treatment and improve ventilation while the wall dries.

Do water-repellent masonry creams work?

Water-repellent masonry creams can reduce rain absorption on sound brick walls exposed to driving rain. They work best after repointing and repairs, not as a substitute. On older solid walls, choose a breathable product and take advice first, as some treatments can trap moisture or salts in the wall.

Get a free penetrating damp treatment quote

Tell us what you need and we'll come back with a clear price.

Request a quote