Penetrating Damp Treatment

Penetrating Damp Treatment

Cavity Wall Damp Investigation

Damp caused by debris in cavities, failed cavity trays or unsuitable cavity wall insulation investigated with boroscopes and removed bricks.

Free Penetrating Damp Treatment quote

No obligation. We only use your details to reply about this job.

Cavity Wall Damp Investigation — Penetrating Damp Treatment

What's involved

Cavity walls are designed to keep rain on the outer leaf, but they can fail. Mortar snots and rubble collect on wall ties or at the cavity base, letting water cross to the inner leaf. Missing or failed cavity trays above windows and extensions direct water inwards. In exposed areas, some retrofitted cavity wall insulation has carried moisture across the cavity. The specialist uses a boroscope through small drilled holes to look inside, then removes bricks at key points to clear debris. Faulty cavity trays are replaced. If insulation is the cause, it may need extracting by specialist contractors, which involves drilling and vacuuming out the material. Investigation takes half a day; remedial works vary with the problem found.

How we handle it

  1. Describe the damp

    Use the quote form to say where damp appears, which floor it is on, whether it worsens after rain and if any repairs have already been tried.

  2. Trace the water route

    A specialist inspects outside and inside, checks gutters, pointing, render, roofs and cavities, and identifies where water is getting in.

  3. Get a clear price

    You receive one price for the external repair and any internal making good, including scaffolding or access equipment where needed.

  4. Repair the cause

    The right trade fixes the defect, from gutter work and repointing to flashing repairs, render replacement or basement waterproofing.

  5. Dry and make good

    Once the wall dries, damaged plaster and decoration are repaired. You get written details of the work for your records.

Price guide

Penetrating damp treatment is priced on the repair needed, the access required and the amount of internal making good. Simple gutter fixes cost little, while repointing, re-rendering and basement waterproofing are larger projects. Scaffolding can be a significant part of the cost on upper floors. Typical 2026 costs are set out below.

  • Render patch repair: from £250. Cutting out and patching cracked or hollow render on a small area of wall.
  • Repointing a wall: £45–£90 per m². Raking out and repointing with lime or cement mortar, excluding scaffolding costs.
  • Gutter and downpipe repair: £120–£450. Clearing, resealing joints and refixing brackets on a typical house, depending on access and length.

Questions about cavity wall damp investigation

Can cavity wall insulation cause damp?

Yes, in some cases. Cavity wall insulation installed in exposed walls, or walls with defects such as poor pointing or rubble in the cavity, can carry moisture to the inner leaf. A specialist can inspect the cavity and recommend repairs or, if necessary, extraction of the insulation.

Get a free penetrating damp treatment quote

Tell us what you need and we'll come back with a clear price.

Request a quote