West Lothian · Scotland
Penetrating Damp Treatment in Livingston
We arrange penetrating damp treatment for homes in Livingston and across West Lothian, fixing the water source first.
Where we work around Livingston
We cover all of Livingston and the wider West Lothian area. Postcodes we cover here include EH54 and EH53. We also take jobs in East Calder, Uphall, Polbeth, West Calder and Kirknewton.
Penetrating Damp Treatment in Livingston: local know-how
Suburban homes in Livingston with bay windows often have leaking bay roofs that cause damp at the top of the walls. Garages and porches in Livingston suburbs often have flat roofs that leak into adjoining walls.
Scotland's towns have a lot of sandstone and granite buildings, tenement flats and harled houses, with Scottish building standards rather than English Building Regulations applying. New-build homes in Livingston can suffer damp from missing cavity trays or poorly sealed windows. Tenements in Livingston often suffer penetrating damp from shared roofs, gutters and stonework, so repairs may involve all owners under the tenement rules.
What we can do in Livingston
Roof, Chimney and Flashing Repairs
Slipped slates, cracked tiles, failed lead flashings and leaking chimney stacks repaired to stop water running into walls and ceilings.
Render Repairs and Replacement
Cracked, hollow or blown render repaired or replaced, with breathable lime render or modern systems chosen to suit the wall behind.
Repointing and Masonry Repairs
Eroded or cracked mortar joints raked out and repointed, with spalled bricks or stones replaced so walls shed water properly again.
Gutter, Downpipe and Drainage Repairs
Blocked, leaking or misaligned gutters and downpipes repaired or replaced so rainwater is carried away from walls instead of soaking them.
Basement and Below-Ground Waterproofing
Cellars and basements protected against water from the ground using cavity drain membranes, tanking or drainage designed to BS 8102.
Cavity Wall Damp Investigation
Damp caused by debris in cavities, failed cavity trays or unsuitable cavity wall insulation investigated with boroscopes and removed bricks.
Typical costs in Livingston
- Full elevation re-render: £50–£95 per m². Stripping and replacing render with lime or modern systems, plus scaffolding.
- Render patch repair: from £250. Cutting out and patching cracked or hollow render on a small area of wall.
- Repointing a wall: £45–£90 per m². Raking out and repointing with lime or cement mortar, excluding scaffolding costs.
Prices are a guide. Your quote for Livingston is a fixed price based on the details you give us. Full price guide.
Penetrating Damp Treatment questions from Livingston
Is cavity wall insulation causing damp in my Livingston home?
It can, especially in exposed Livingston homes or walls with defects. Specialists use a boroscope to inspect the cavity and advise on repairs or extraction if insulation is carrying moisture to the inner wall.
Do you waterproof basements in Livingston?
Yes. Basements and cellars in Livingston can be waterproofed using cavity drain membranes, tanking or drainage designed to BS 8102. The system depends on the water table and how you plan to use the space.
Why does my Livingston home get damp after rain?
Damp that worsens after rain in Livingston homes is usually penetrating damp. Common causes include blocked gutters, eroded pointing, cracked render, failed flashings and leaking roofs. A specialist will inspect outside to find the cause.
Do you repair chimneys in Livingston?
Yes. Roofers repair chimney flashings, pointing and caps in Livingston to stop damp on chimney breasts. Disused flues are capped and ventilated to prevent rain and condensation getting in.
Can cavity wall insulation cause damp?
Yes, in some cases. Cavity wall insulation installed in exposed walls, or walls with defects such as poor pointing or rubble in the cavity, can carry moisture to the inner leaf. A specialist can inspect the cavity and recommend repairs or, if necessary, extraction of the insulation.
Why is there damp on my chimney breast?
Damp on a chimney breast is often caused by rain getting in through the stack, failed lead flashings or an uncapped flue. It can also come from hygroscopic salts left by years of burning fuel, which attract moisture. A capped, ventilated flue and stack repairs usually solve it.
Helpful guides
Penetrating Damp: What You Can Fix Yourself and What You Can't
Simple ground-level jobs such as clearing a single-storey gutter, refixing a downpipe, clearing weep holes and keeping soil away from walls…
Read the guide →Penetrating Damp in Rented Homes: Landlord and Tenant Rules
In most residential tenancies the landlord is responsible for fixing penetrating damp, because it comes from defects in the structure and…
Read the guide →Get a free penetrating damp treatment quote in Livingston
Tell us what you need and we'll come back with a clear price.
Request a quote