Staffordshire · West Midlands
Penetrating Damp Treatment in Burton upon Trent
Exposed homes in Burton upon Trent face driving rain, and our specialists repair pointing, render and cavities across Staffordshire.
Waterproof your Burton upon Trent basement with our specialists.
Burton upon Trent and the surrounding area
Burton upon Trent falls within Staffordshire, West Midlands. That includes the DE14, DE15 and DE13 postcode districts. We also take jobs in Tutbury, Rolleston on Dove and High Cross Bank.
Working in Burton upon Trent
The West Midlands motorway network makes it one of the easiest areas in the country to reach quickly, which helps with short-notice work. Victorian homes in Burton upon Trent often have cast iron gutters that crack or rust, causing damp patches on walls below.
Garages and porches in Burton upon Trent suburbs often have flat roofs that leak into adjoining walls. Extensions on Burton upon Trent homes sometimes lack cavity trays, causing damp at the junction with the main house.
Our services in Burton upon Trent
Roof, Chimney and Flashing Repairs
Slipped slates, cracked tiles, failed lead flashings and leaking chimney stacks repaired to stop water running into walls and ceilings.
Render Repairs and Replacement
Cracked, hollow or blown render repaired or replaced, with breathable lime render or modern systems chosen to suit the wall behind.
Repointing and Masonry Repairs
Eroded or cracked mortar joints raked out and repointed, with spalled bricks or stones replaced so walls shed water properly again.
Gutter, Downpipe and Drainage Repairs
Blocked, leaking or misaligned gutters and downpipes repaired or replaced so rainwater is carried away from walls instead of soaking them.
Basement and Below-Ground Waterproofing
Cellars and basements protected against water from the ground using cavity drain membranes, tanking or drainage designed to BS 8102.
Cavity Wall Damp Investigation
Damp caused by debris in cavities, failed cavity trays or unsuitable cavity wall insulation investigated with boroscopes and removed bricks.
Guide prices for Burton upon Trent
- Repointing a wall: £45–£90 per m². Raking out and repointing with lime or cement mortar, excluding scaffolding costs.
- Gutter and downpipe repair: £120–£450. Clearing, resealing joints and refixing brackets on a typical house, depending on access and length.
- Basement waterproofing: £90–£180 per m². Cavity drain membrane or tanking with drainage and sump, depending on design and use.
Prices are a guide. Your quote for Burton upon Trent is a fixed price based on the details you give us. Full price guide.
Penetrating Damp Treatment questions from Burton upon Trent
Do you treat penetrating damp in Burton upon Trent?
Yes. We arrange penetrating damp treatment across Burton upon Trent and nearby areas, including Swadlincote and Ashby-de-la-Zouch. A specialist traces the water source and provides a clear price for the repair and internal making good.
Is cavity wall insulation causing damp in my Burton upon Trent home?
It can, especially in exposed Burton upon Trent homes or walls with defects. Specialists use a boroscope to inspect the cavity and advise on repairs or extraction if insulation is carrying moisture to the inner wall.
Do you waterproof basements in Burton upon Trent?
Yes. Basements and cellars in Burton upon Trent can be waterproofed using cavity drain membranes, tanking or drainage designed to BS 8102. The system depends on the water table and how you plan to use the space.
Why does my Burton upon Trent home get damp after rain?
Damp that worsens after rain in Burton upon Trent homes is usually penetrating damp. Common causes include blocked gutters, eroded pointing, cracked render, failed flashings and leaking roofs. A specialist will inspect outside to find the cause.
How much does penetrating damp treatment cost?
Costs vary widely with the cause. Gutter repairs typically cost £120–£450, repointing £45–£90 per square metre and chimney flashing repairs £350–£1,200. Re-rendering costs £50–£95 per square metre, and basement waterproofing £90–£180 per square metre. Scaffolding and internal making good add to the total.
How long does a wall take to dry after penetrating damp?
Once the source is fixed, walls usually take weeks to months to dry, depending on thickness, material and weather. A rough guide is about 25 mm of wall thickness per month. Keep the room heated and ventilated, and wait before replastering or applying non-breathable finishes.
Helpful guides
Penetrating Damp in Cavity Walls: Causes and Repairs
Cavity walls are designed to stop rain crossing from the outer to the inner leaf, but damp can still get through when the cavity is…
Read the guide →Penetrating Damp in Rented Homes: Landlord and Tenant Rules
In most residential tenancies the landlord is responsible for fixing penetrating damp, because it comes from defects in the structure and…
Read the guide →Get a free penetrating damp treatment quote in Burton upon Trent
Tell us what you need and we'll come back with a clear price.
Request a quote